Murphy Europe offer a range of standard and non-standard control panels (or "Diagnostic Centres") as detailed below.
Bulletins, specification and circuit diagrams for the panels and component parts may be viewed by clicking on the
links shown.
For further assistance with panel selection, installation or operation, please contact our engineers.
Section 1 - Standard Panels |
|
stock
code |
panel name / description |
bulletin /
spec sheet |
circuit
diagram |
engine oil
pressure |
engine
coolant
temp |
engine
oil
temp |
gearbox
pressure |
pump
pressure |
charge
fail
warning |
main
controller /
magnetic
switch |
keyswitch |
tacho |
mag.
pickup |
battery
charger |
enclosure type |
extras/notes |
| B6502, B6503, B6524, B6525 panels for ECU-based (J1939) Perkins 1104D/1106D & Caterpillar C4.4/C6.6 stationary engines. More info > |
 |
B6502 |
Manual start/stop, 12V |
|
|
|
|
|
|
|
|
|
|
|
- |
- |
custom |
1) TSC1 speed control by raise/lower toggle switch
2) Integral harness/connectors for direct ECU & engine mating.
3) Black painted metal enclosure
|
| B6503 |
Manual/auto start/stop, 12V |
|
|
PV101 |
PV101 |
PV101 |
PV101 |
PV101 |
CST9621 |
CST9621 |
|
PV101 |
| B6524 |
Manual start/stop, 24V |
|
|
PV101 |
PV101 |
PV101 |
PV101 |
PV101 |
CST9621 |
CST9621 |
|
PV101 |
| B6525 |
Manual/auto start/stop, 24V |
|
|
PV101 |
PV101 |
PV101 |
PV101 |
PV101 |
CST9621 |
CST9621 |
|
PV101 |
| B6468 panels for non-ECU Perkins 400 series & Caterpillar C1.1 / C2.2 stationary engines. More info > |
 |
B6468 |
Manual start/stop, 12V |
|
|
- |
- |
- |
- |
- |
|
|
|
- |
- |
- |
custom |
1) Hourmeter
2) Integral harness/connectors for direct engine mating.
3) Black painted metal enclosure
|
B6455 Auto Pump Panel. More info > |
|
|
|
|
|
|
|
|
|
|
- |
- |
- |
|
|
 |
B6455 |
Auto pump panel, 12V |
|
|
external
switch/
Swichgage |
external
switch/
Swichgage |
- |
- |
- |
LAMP |
|
Man/Off/Auto |
|
YES |
|
|
1) IP54 weatherproof enclosure
2) Autostart/stop via high and low float switches
3) Engine connection by integral 700mm wiring harness
4) Float switch connection via front facia IP68 plugs/sockets. |
| Standard Diagnostic Centres. More info > |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
B5232 |
Intermediate Diagnostic Centre, 12V |
|
|
|
|
- |
- |
- |
LAMP |
|
O/R/H/HS |
- |
- |
- |
38.170. |
Hourmeter |
| B6175 |
Intermediate Diagnostic Centre, 24V |
|
|
|
|
- |
- |
- |
LAMP |
|
O/R/H/HS |
- |
- |
- |
38.170. |
Hourmeter |
| B5922 |
Advanced Diagnostic Centre, 12V |
|
|
|
|
- |
- |
- |
LAMP |
|
O/R/H/HS |
|
- |
- |
38.200. |
|
| B6178 |
Advanced Diagnostic
Centre, 24V |
|
|
|
|
- |
- |
- |
LAMP |
|
O/R/H/HS |
|
- |
- |
38.200. |
|
| 33.400.689-based irrigation control panels. More info. > |
 |
B0188 |
33.400.689 Irrigation control panel |
|
|
|
|
- |
- |
|
LAMP |
|
O/R/H/HS |
- |
- |
- |
38.400. |
1) 15T 0 - 15 min
pump low pressure override timer;
2) 24T 0 - 24 hour
run timer |
| B4111 |
Same features as B0188
but in
weatherproof enclosure, with expansion
provision for OPL and Tachometer |
|
|
|
|
- |
- |
|
LAMP |
|
O/R/H/HS |
- |
- |
- |
SM4315 |
1) 15T 0 - 15 min
pump low pressure override timer;
2) 24T 0 - 24 hour
run timer |
| B5001 |
As B4111
less weatherproof enclosure |
|
|
|
|
- |
- |
|
LAMP |
|
O/R/H/HS |
- |
- |
- |
N/A |
1) 15T 0 - 15 min pump low pressure override timer;
2) 24T 0 - 24 hour run timer |
| B6406 |
As B4111 plus additional OPLFC and
AT67207 throttle control. |
|
|
|
|
- |
- |
|
LAMP |
|
O/R/H/HS |
- |
- |
- |
SM4315 |
1) 15T 0 - 15 min
pump low pressure override timer;
2) 24T 0 - 24 hour
run timer;
3) Throttle control by OPLFC and AT03069 |
| 75160 series engine/pump panels. More info. > |
 |
B2647 |
751602 Diagnostic Centre,
12V |
|
|
|
|
- |
- |
- |
NO |
|
- |
- |
- |
- |
751603 |
Emergency
stop push button |
| B2643 |
751603 Diagnostic Centre,
12V |
|
|
|
|
- |
- |
|
NO |
|
- |
- |
- |
- |
751603 |
Emergency
stop push button |
| WD
Series Engine Protection Panels. More info > |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
B2644 |
WD100 Diagnostic Centre,
12V |
|
|
|
|
- |
- |
- |
NO |
|
- |
- |
- |
- |
WD1 |
Jackplug for
auxiliary shutdown |
| B2880 |
WD107 Diagnostic Centre,
12V |
|
|
|
|
- |
- |
- |
NO |
|
- |
- |
- |
- |
WD1 |
Warning
before shutdown alarms:
SAH-A mini-siren and
TL7 flashing lamp |
| B6407 |
B2880 (WD107) without oil
line |
|
|
|
|
- |
- |
- |
NO |
|
- |
- |
- |
- |
WD1 |
Warning before shutdown alarms:
SAH-A mini-siren and TL7 flashing lamp |
| B2842 |
WD270 Diagnostic Centre,
12V |
|
|
|
|
- |
- |
|
NO |
|
- |
- |
- |
- |
WD2 |
|
| B6300 |
WD277 Diagnostic Centre,
12V |
|
|
|
|
|
- |
- |
NO |
|
- |
- |
- |
- |
WD2 |
Warning before shutdown alarms:
SAH-A mini-siren and TL7 flashing lamp |
Section 2 - Non Standard Panels |
|
stock
code |
panel name / description |
bulletin /
spec sheet |
circuit
diagram |
engine oil
pressure |
engine
coolant
temp |
engine
oil
temp |
gearbox
pressure |
pump
pressure |
charge
fail
warning
lamp |
main
controller /
magnetic
switch |
keyswitch |
tacho |
mag.
pickup |
battery
charger |
enclosure |
extras/notes |
| |
B3079 |
Marine monitoring panel,
24V |
|
|
|
|
- |
|
- |
NO |
- |
OFF /
START |
- |
- |
- |
33.200. |
EG21 DC
voltmeter. Monitoring only (no shutdown). |
| B6497 |
Control panel, JCB444 mechanical |
|
|
- |
- |
|
- |
- |
LED |
|
O/R/S |
|
- |
- |
|
Integral wiring harness, 10A fuse |
|
