      |
 |
HelmView
HelmView features the following specs:
Display| Display | 162mm (6.4”) colour transmissive TFT LCD |
| Resolution | VGA, 640 x 480 pixels |
| Orientation | Landscape |
| Backlighting | CCFL, 350 cd/m² (50,000 h lifetime) |
| Languages | User-selectable English, French, Spanish, German, Italian |
| Keyboard | 8 capacitive touch keys |
| LEDs | Amber and red LED fault indication |
Electrical/comms
| Operating Voltage | 6 to 32 VDC, protected against reverse polarity and load-dump |
| Power Consumption | 10 W full backlight 22 W full backlight with heater (< -10º C) |
| Processor | Sharp ARM9 LH7A404, 200 MHz Philips ARM7 LPC2194 70 MHz |
| Flash Memory | 16 Mbytes |
| RAM | 32 Mbytes SDRAM |
| EEPROM | 32 Kbytes |
| CAN | 4 CAN ports according to CAN specification 2.0B. One port isolated according to NMEA 2000 |
| RS-485 | 2 MODBUS Master ports at 38.4 Kbaud |
| Protocols | J1939, NMEA 2000, proprietary |
| Connection | 4 Deutsch DT 6-pin connectors:- |
A |
B |
C |
D |
||||||||||||
| CAN1_L | 3 | 4 | CAN2_L | 3 | 4 | RS485_1L | CAN3_L | 3 | 4 | RS485_2L | CAN4_L | 3 | 4 | ||
| CAN1_H | 2 | 5 | Backlite | CAN2_H | 2 | 5 | RS485_1H | CAN3_H | 2 | 5 | RS485_2H | CAN4_H | 2 | 5 | |
| Power | 1 | 6 | GND | Power | 1 | 6 | GND | Power | 1 | 6 | GND | NET-S | 1 | 6 | NET-C |
Mechanical
| Mounting variants | Panel Mounting – Mounts with six screws into the lip of the bezel. Gimble Mounting – Uses an articulating gimble. |
| Dimensions (W x H) | 222 x 184 mm (8.74" x 7.23"), landscape Panel mount depth – 15.5mm (0.605") Unit depth – 83mm (3.265") |
| Cutout for panel mounting (W x H) | 182 x 143.5 mm (7.15" x 5.65"), landscape |
| Case Material | High impact acrylic front case Polycarbonate back case |
| Weight | 910g (2 lb) |
Environmental
| Operating Temperature | -20º C to +85º C (-40º C with optional heater) |
| Storage Temperature | -40º C to +85º C |
| Protection | IP68 |
| Emissions | IEC 60945, 95/54/EC |
| Immunity | SAE J1113, ISO 11452 |
NMEA 2000 Parameter Group Numbers (PGNs)*
| 127245 | Rudder |
| 127250 | Vessel Heading |
| 127488 | Engine Parameters, Rapid Update |
| 127489 | Engine Parameters, Dynamic |
| 127493 | Transmission Parameters, Dynamic |
| 127505 | Fluid Levels |
| 127508 | Battery Status |
| 128259 | Speed |
| 128267 | Water Depth |
| 129025 | Position, Rapid Update |
| 129026 | COG & SOG, Rapid Update |
| 130310 | Environmental Parameters |
| 130576 | Small Craft Status |
J1939 Parameter Group Numbers (PGNs)*
| 61442 | ETC1 – Electronic Transmission Controller 1 |
| 61443 | EEC2 – Electronic Engine Controller 2 |
| 61444 | EEC1 – Electronic Engine Controller 1 |
| 61445 | ETC2 – Electronic Transmission Controller 2 |
| 65164 | AAI – Auxiliary Analog Information |
| 65213 | FD – Fan Drive |
| 65243 | EFL/P2 – Engine Fuel Level/Pressure 2 |
| 65248 | VD – Vehicle Distance |
| 65253 | HOURS – Total Engine Hours |
| 65257 | LFC – Fuel Consumption (Liquid) |
| 65262 | ET1 – Engine Temperature 1 |
| 65263 | EFL/P1 – Engine Fuel Level/Pressure 1 |
| 65265 | CCVS – Vehicle Speed |
| 65266 | LFE –Fuel Economy (Liquid) |
| 65269 | AMB – Ambient Conditions |
| 65270 | IC1 – Inlet/Exhaust Conditions |
| 65271 | VEP – Vehicle Electrical Power |
| 65272 | TRF1 – Transmission Fluids 1 |
*Partial List
Inside this section:
- PV101 – PowerView™ J1939 display module.
- PV1000 – PowerView™ J1939 display module.
- Helmview - Marine display for J1939/NMEA 2000 systems
- PVA series – PowerView™ J1939 gauges and alarm module.
- PVM series – PowerView™ J1939 gauges.
- CANdrive™ – J1939 CANbus to electric gauge interface
- FuelCAN - fuel sender to J1939 converter
- SenderCAN™ - sender/switch to J1939 converter
- XM500 – J1939 Input/Output module.
- M110 series – PowerView™ J1939 control panels, basic.
- M310 series – PowerView™ J1939 control panels, advanced.
- MDDM – Murphy Display and Diagnostic Module.
- MLA series – MDDM analogue gauges and alarm.
- MDDM-MOD – MDDM with Modbus RTU communications.