      |
 |
MURPHYLINK J1939
display & Gauge Systems
display & Gauge Systems
MeCAN™
Modern ECU-based engines and machines use the SAE J1939 CANbus protocol to integrate control, display, instrument and communication systems.
But many applications and equipment fleets continue to use older, non-ECU engines. MeCAN translates 'mechanical' engine speed sensor, resistive sender and fault switch signals into SAE J1939 CANbus data. Non-ECU engines can be upgraded with future-proof CANbus control systems, and standard control and harness systems can be developed for both ECU and non-ECU engines.
MeCAN's epoxy-filled construction gives superior shock resistance and environmental sealing, allowing use in off-road, marine or other demanding conditions.
Further information:-
Inside this section:
Components:
- PV10 – PowerView™ J1939 display module.
- PV101 – PowerView™ J1939 display module.
- PV750 – PowerView™ J1939 display module
- PV1000 – PowerView™ J1939 display module.
- Helmview - Marine display for J1939/NMEA 2000 systems
- PVA series – PowerView™ J1939 gauges and alarm module.
- PVM series – PowerView™ J1939 gauges.
- PVS-5 - Power supply for PVM series
- CANdrive™ – J1939 CANbus to electric gauge interface
- FuelCAN - fuel sender to J1939 converter
- MeCAN™ - mechanical engine sensor to J1939 converter
- SenderCAN™ - sender/switch to J1939 converter
- XM500 – J1939 Input/Output module.
- MDDM – Murphy Display and Diagnostic Module.
- MLA series – MDDM analogue gauges and alarm.
- MDDM-MOD – MDDM with Modbus RTU communications.
Complete control panels:
- M110 series – PowerView™ J1939 control panels, basic.
- M310 series – PowerView™ J1939 control panels, advanced.
- B6502 - Control panels for Perkins/Caterpillar stationary engines